purchase
Intellisense Cellular is a Wireless Remote Monitoring System that anyone
can install in less than thirty minutes. When an alarm is activated,
the systems will text message your cell phone and/or send you an email.
Intellisense Cellular is a two-piece wireless system; base unit and remote
unit (can be 100 ft apart). Because Intellisense Cellular has a built-in
GSM cell phone there are no monthly charges, just buy any pre-paid SIM
phone card and it's $.05/call. Programming is easy too - just send a
text message to the Intellisense Cellular System with your cell phone
number (and optional email address) and the system does the rest.
THE SENSORS:
Intellisense Cellular comes standard with one Base Unit and one Remote
Unit. Each unit has its own sensors and can be accessed by your cell
phone. Below is a list of the sensors, what their function are and where
they are located.
Base Unit:
Temperature Sensor - Monitors the room temperature. You can
set the low and high temperature thresholds. If the temperature goes
above or below the threshold, you will be notified. For example, if the
heat in the room fails and the temperature falls below the threshold,
an alarm message will be sent.
Motion Sensor - The motion sensor points toward the entrance of
the room. If someone were to enter the room, it would trip the motion
sensor and notify the customer. The motion sensor selected is a highly
accurate sensor that activates only when someone enters the detection
zone. It is not activated by moving curtains from wind etc.
Loss of Power - Sends an alarm message to you if there is a loss
of power.
Smoke/Fire - Monitors smoke and fire.
Audio Microphone - Can listen-in to rooms activities.
Remote Unit:
Temperature Sensor - The temperature sensor in the Remote Unit
monitors the temperature in that room. This also has a high and low threshold.
Water Alarm - The Remote Unit can be connected to a wide variety
of float switches or water sensors. As soon as water either trips the
float switch or water rises to the sensor, the system will alert the
customer that there is water present.
Sensors being developed:
- Humidity Sensor - Monitor the humidity in the room.
Typical Applications:
- Portable Wi-Fi "Hot Spots"
- Internet Access Points
- Video Surveillance Systems
Contact Sensormetrics
for more information.
